251聚酰亞胺薄膜有機硅壓敏膠帶

一、產品簡介：
      251聚酰亞胺薄膜有機硅壓敏膠帶是由聚酰亞胺薄膜單面涂進口耐高溫有機硅壓敏膠粘劑制成。具有一定的表面自粘性，剝離強度、內聚力及一定的剪切強度。該膠帶適用于電機、電器、電纜、電子產品的H級絕緣。

二、產品參數：

 1、外觀
   膠帶盤面應平整、無氣泡、無流膠、膠層均勻。開卷時膠層不轉移，邊緣整齊無破損。

 2、尺寸
    2.1　膠帶長度
        每卷膠帶長度為30m～60m或根據用戶要求
    2.2　膠帶寬度
        寬度為10mm～50mm，偏差為±0.5mm；寬度大于50mm的膠帶，偏差為±1.0mm，也可根據用戶的要求供給。
    2.3  膠帶厚度
        膠帶的厚度與允許偏差：根據用戶的要求可供給各種厚度的膠帶，允許偏差±0.008mm。

 3、性能要求
 

251 Polyimide Pressure Sensitive Adhesive Tape with Silicone Resin

    This kind of tape is made of polyimide material with heat-resistant silicone adhesive, which shows excellent dielectric insulation properties, high heat resistant, excellent solvent resistant, mask-off gold finger contacts during wave soldering, short-term temp. 250c x 5sec, and is widely used for electrical insulation on motor, transformer, coils, PCB making and so on. 
 

I requirements:

1.1 appearance

The film surface is smooth, bright and clean. It should have no defects such as folding, tearing, particulate, air bubble, pinhole and any external impurity. Its edges shall be orderly and no breakage.

1.2 dimension

The roll length is 30-60 meter or supplied according to the customer’s requirements. The width and allowable deviation: 10mm-50mm: ±0.5mm;  >50mm: ±1mm.

1.3 thickness

Thickness and allowable deviation: all of the thickness is available, ±0.008mm.

****************************************
公司名稱：揚州金冠電氣有限公司
公司地址：江蘇省揚州市寶應經濟開發區
：
傳    真：
客 服  2623069988
微 信 號：JGDQ88888
電子：
聯 系 人：陳
****************************************
詳情請瀏覽：http://www.wjfhcx。。ｃｏｍ
****************************************